DVIGear DVI-7440 - Manual (Page 3)

1. 5 VDC
The supplied AC Power Adapter includes a locking DC plug for a
secure connection.
2. EDID ADDRESS Select the desired EDID using the two rotary switches – see page 4.
3. LEARN EDID Press to learn the EDID of the connected display – see page 4.
4. Status Indicator LEDs: Function When Blinking
EDID Status N Selected EDID is invalid EDID learn failure
EDID Status Y Selected EDID is valid EDID learn success
HPD Hot Plug Detect: Output 1 is connected —
SRC +5V Source Connected: +5VDC present on input —
5. DVI-DL INPUT Connect DVI source device to DVI-DL INPUT.
6. USB Control Use a USB cable to connect a PC to the unit.
7. DVI-DL OUTPUTS 1 and 2 Connect DVI displays to DVI-DL OUTPUTS.
Installation
1.) Connect a DVI source to the DVI-DL input connector.
2.) Connect the monitors (or other sink devices) to the DVI-DL output connectors.
3.) Connect the supplied AC power adapter to the +5V input, then connect the adapter to the AC source.
4.) The unit is ready to be used.
DVI-7440 EDID Manager / Dual-Link DVI 1x2 Splitter
Quick Start Guide
3
Twist 90° clockwise to lock
Locking DC Power Plug