DVIGear DVI-7314 - Manual (Page 4)

DVIGear
1059 Triad Court, Suite 8,
Marietta, GA 30062
Toll Free: 888.463.9927
Tel: 770.421.6699
Fax: 770.234.4207
[email protected]
www.dvigear.com
4
Instructions for Learning the EDID from a Display
1.) Apply power to the display.
2.) Connect the DVI-7313 / DVI-7314 Transmitter unit to the display’s DVI or HDMI input port.
3.) Connect the External AC Power Adapter to the Transmitter unit.
4.) Press the Learn EDID button (page 2 - #5) by manually inserting a stylus into the side of the
Transmitter unit. If the EDID is properly read, the BLUE Indicator LED (page 2 - #2a) should
illuminate once.
5.) Remove the External AC Power Adapter from the Transmitter unit.
6.) Disconnect the Transmitter unit from the display and connect it to the DVI or HDMI signal
source device.
7.) Follow the Installation Instructions (3-6) listed on page 3.
Insert a stylus to press the Learn EDID Button
Learn EDID Button
Model Cable Length Recommended Cable Type
DVI-7313 > 1,640 ft. ( > 500 m ) 50/125μ OM4 Multi-Mode Fiber
DVI-7313 > 1,000 ft. ( > 300 m ) 50/125μ OM3 Multi-Mode Fiber
DVI-7314 > 1.2 mi. ( > 2000 m ) 9/125μ Single-Mode Fiber
DVI-7314 > 1,640 ft. ( > 500 m ) 50/125μ OM4 Multi-Mode Fiber
DVI-7314 > 1,000 ft. ( > 300 m ) 50/125μ OM3 Multi-Mode Fiber
DVI-7313_DVI-7314-QSG-01 / December.2014
Maximum Cable Lengths
WARNING: Invisible Laser Radiation
Do not view directly with optical instruments or look into beam.
LASER RADIATION