Chicago Electric Flexible Shaft Grinder/Carver 40432 - Manual (Page 4)

Page 4 For technical questions, please call 1-800-444-3353. SKU 40432
with the switch is dangerous and must
be repaired.
Disconnect the plug from the power
c.
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories,
or storing power tools. Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
Store idle power tools out of the
d.
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are
dangerous in the hands of untrained
users.
Maintain power tools. Check for
e.
misalignment or binding of moving
parts, breakage of parts and any
other condition that may affect the
power tool’s operation. If damaged,
have the power tool repaired before
use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
f.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
use the power tool, accessories
g.
and tool bits etc. in accordance
with these instructions, taking into
account the working conditions and
the work to be performed. Use of
the power tool for operations different
from those intended could result in a
hazardous situation.
Service 5.
Have your power tool serviced by a a.
qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
Flex Shaft Grinder Safety Warnings
The rated speed of the accessory 1.
must be at least equal to the
maximum speed marked on the power
tool. Accessories running faster than
their RATED SPEED can break and fly
apart.
Do not use a damaged accessory.
2.
Before each use inspect the
accessory such as abrasive wheels
for chips and cracks, backing pad
for cracks, tear or excess wear, wire
brush for loose or cracked wires. If
power tool or accessory is dropped,
inspect for damage or install an
undamaged accessory.
Do not bend the Flexible Shaft (21)
3.
at more than a 90° angle. Kinks or
crimps in the Flexible Shaft will result in
inefficient tool operation and create a
safety hazard.
Maintain labels and nameplates on
4.
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
Avoid unintentional starting. Prepare to
5.
begin work before turning on the tool.
Do not lay the tool down until it has come
6.
to a complete stop. Moving parts can
grab the surface and pull the tool out of
your control.
When using a handheld power tool,
7.
maintain a firm grip on the tool with both
hands to resist starting torque.
Do not leave the tool unattended when
8.
it is plugged into an electrical outlet.
Turn off the tool, and unplug it from its
electrical outlet before leaving.
REV 06g, 09e; 09k