Cabletron Systems 9E423-36 - Manual (Page 3)

1
Appendix
9E423-36 Module Specific
Information
Introduction
This appendix contains local management information that is specific to the
9E423-36 Ethernet Switch Module.
The 9E423-36 Ethernet Switch Module is a 37-port switching module with:
• 36 front panel Ethernet ports
• 1 Internal Network Bus (INB) backplane port
Each front-panel port of the 9E423-36 can be configured to operate in the Full
Duplex mode. This configuration allows each port to provide a full 20 Mbps of
bandwidth.
Modifying Fields and User Privileges
To modify fields on this module, you must have read-write or super-user
privileges. If you have read-only privileges, you can view information; however,
you cannot modify any fields. For more information about user privileges and
community names, see the
SmartSwitch 9000 Module Local Management User’s
Guide.