Drawmer Advanced Dynamics for Mackie D8B - Manual (Page 27)

27
User’s Guide
Stereo Plug-in Routing
If the plug-in has a stereo input as well as stereo output,
typically it will be fed from two Aux buses and returned to a pair
of FX return channels. In the diagram below, Aux 1 and Aux 2
feed the plug-in in stereo, and its output is returned to FX 1 and
FX 2. If the plug-in has a stereo input, it is permissible to send
the same aux bus to both inputs.
FX Channels 1&2
(channels 49&50)
Note: When an FX Channel Assignment light
is lit, the assigned plug-in is open and visible
on the main mixer screen.
Stereo plug-in
Stereo Input
(Aux 1 & 2)