beautypg.com

Drawmer d62, Digital module, Safety considerations – Drawmer D62 Digital Module User Manual

Page 5

background image

D62 OPERATORS’ MANUAL

1

DRAWMER D62

Digital Module

SAFETY CONSIDERATIONS

CAUTION - STATIC HANDLING

TO REDUCE THE RISK OF DAMAGE TO THE DIGITAL MODULE ENSURE

THAT STATIC HANDLING PROCEDURES ARE OBSERVED WHEN HOLDING

THE D62-TDIF MODULE.

CAUTION - SERVICING

DO NOT PERFORM ANY SERVICING IF YOU ARE NOT QUALIFIED.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE

THIS EQUIPMENT TO RAIN OR MOISTURE.

INTRODUCTION

The D62-T or D62-A digital convertor module may be retrofitted to an analogue 1962
unit. This provides 16, 18, 20 or 24-bit wordlength outputs in both AES/EBU and S/PDIF
formats with user selectable dither. The D62-T also includes a Tascam™ T-DIF
interface while the D62-A has an integral ADAT™ optical interface. Word sync In and
Out is provided as standard and the user may select between 48kHz, 44.1kHz and
externally clocked sample rates. This manual will refer to the digital module as the D62
wherever it is applicable to both T-DIF and ADAT.