Drawmer DC2496 High Resolution A/D Converter - Manual (Page 21)

21
CHAPTER 7
DC2496 DATA
SPECIFICATION
Analogue Input
Connectors XLR Balanced (Pin 2 Hot)
Impedance 10 K Ω
Max. Input Level +24 dBu
Input CMR Better than -50dB
A to D Conversion 24 Bit
Dynamic Range A/D >129dBFs
A Weighted at 48KHz
Crosstalk -100dB @1kHz
-90dB@10kHz
Sample Rate 44.1, 48, 88.2,
96kHz, EXT
Analogue Output
Connectors XLR Balanced
(Pin 2 Hot)
Impedance 50 Ω
Max. Output Level +21 dBu
Output Balance -35dB@1KHz
D to A Conversion 24 Bit
Dynamic Range -108dB Unweighted
THD <0.008%@1KHz, +10dBu
Frequency Response 96kHz 7Hz - 44kHz
@ -1dB 88.2kHz 7Hz - 41kHz
48kHz 7Hz - 22kHz
44.1kHz 7Hz - 20kHz
Digital Inputs and Outputs
Main AES/EBU In/Out XLR
Main S/PDIF In/Out Coaxial, RCA Type
TDIF 25 pin D plug.
8 Channel
ADAT Light Pipe (Optical Cable).8 Channel
Sample Rates 44.1, 48, 88.2 and 96KHz
Word Length 16, 18, 20, 22, 24 Bits
Aux Digital Outputs (SRC)
Aux AES/EBU In/Out XLR
Aux S/PDIF In/Out Coaxial, RCA Type
Sample Rates 44.1kHz, 48kHz
Word Length 16, 20 Bits
Multi-Track I/O
ADAT Optical In and Out on all eight channels using
Light Pipe
TDIF In and Out on all eight channels using
Tascam Digital Interface (25 pin DSUB)
General
Power Requirements 40VA
Fuse Rating T160mA at 220 Volts, T320mA at
110Volts
CONFORMING TO: IEC 127-2
Fuse Type 20mm x 5mm, Class 3 Slow - Blow
250Volt working
Case Size (mm) 482(w) x 88(h) x 250(d)
Weight (incl packaging) 5KG
+D=FJAH 7 DC2496 DATA