Drawmer DMS-1 M-Clock Master Clock Generator and Multiple Sample Rate Converter - Manual (Page 9)

9
7/8 When the 7/8 switch is active the M-Clock can output at the Superclock standard, as
used by Pro Tools™.
The 7/8 switch affects only connectors 7 and 8 on the BNC Clock Outputs on the rear of the
panel, working independantly from the other outputs.
Output Sample Rate 7/8 Switched IN (Superclock)
44.1 kHz 11.2896 mHz
48 kHz 12.288 mHz
88.2 kHz 11.2896 mHz
96 kHz 12.288 mHz