Drawmer DMS-1 M-Clock Master Clock Generator and Multiple Sample Rate Converter - Manual (Page 11)

11
Internal Clock Generator
2 x Temperature Compensated Xtal Oscillators
(TCXOs)
AES11 GRADE 1 Stability,
Tolerance
+/-1ppm (0-60
Celcius), <<+/-1ppm
(15-30 Celcius)
Phase noise -130 dBc/Hz @ 1kHz
@ 24.5760 MHz to give Fs 48 kHz, 96 kHz &
192 kHz + 256Fs
(superclock)
@ 22.5792 MHz to give Fs 44.1 kHz, 88.2 kHz &
176.4 kHz + 256Fs
(superclock)
Word Clock Outputs
Output impedance 22.5 ohms giving 4v
pk-pk into 75 ohms
Outputs 1-4 selectable between 44.1, 48, 88.2, 96 kHz
Outputs 5-6 selectable between 44.1, 48, 88.2, 96,
176.4, 192 kHz
Outputs 7-8 selectable between 44.1, 48, 88.2, 96,
256Fs (Superclock)
AES 11 Outputs
2 x Neutrik XLR 110 ohm source @
44.1, 48, 88.2, 96 kHz
2 x Gold Plated Phono 75 ohm source @
44.1, 48, 88.2, 96 kHz
Sample Rate Conversion
4 x Stereo Sample Rate Converters:
full up/down conversion
from 44.1kHz to 96kHz
2 x Neutrik XLR AES/EBU inputs
1 x Phono SPDIF input
1 x Switchable Phono/TOSLINK input (Front Panel)
All outputs simultaneous on 4 x AES/EBU XLR,
4 x SPDIF Phono,
4 x TOSLINK
THD+Noise > 120 dBFs
General
Power Supply:
Internal, Universal
Input, 10 W
Fuse Rating T315mA for All
voltages.
CONFORMING TO:
IEC127-2
Fuse Type 20mm x 5mm, Class 3
Slow - Blow
250Volt working
Dimensions: 1u, 19" Rack Mount,
482mm(W) x 44mm(H)
x 145mm(D)
Weight 1.7 kg
M-Clock DMS-1 DATA
SPECIFICATION
CHAPTER 4