Dodge 2009 Caravan User Manual

Page 479

Text mode
Original mode

Rear Tail, Stop, Turn Signal, Side Marker and
Backup Lights

1. Raise the liftgate.

2. Remove the tail light assembly by removing the two
screws from the inboard side. Use a fiber stick or similar
tool to gently pry the light on the outboard side to
disengage the two ball studs.

NOTE:

• If a screwdriver is used, make sure a soft material is

placed between the vehicle body and tool so not to
scratch the paint.

• The PRY location is best closest to the studs while

dislodging them separately.

Removing Tail Light Assembly

MAINTAINING YOUR VEHICLE

477