Dodge 2011 Grand Caravan User Manual

Page 240

Text mode
Original mode

Once the crossbars are set into position, tighten the
thumb screws completely.

Stowing the Crossbars
Reverse the procedure to stow the crossbars, again, taking
care to keep hand clear of pivoting joint. Crossbars are
identical and can be stowed in either rail nest. Once the
crossbars are stowed, tighten the thumb screws completely.

NOTE:

Load should always be secured to crossbars

first, with rail tie down loops used as additional securing
points if needed. Tie loops are intended as supplemen-
tary tie down points only. Do not use ratcheting mecha-
nisms with the tie loops.

Tightening Crossbar

Rail Tie Loops

238

UNDERSTANDING THE FEATURES OF YOUR VEHICLE