Dodge 2012 Ram User Manual

Page 81

WARNING!

Improper installation of a child restraint to the
LATCH anchorages can lead to failure of an infant or
child restraint. The child could be badly injured or
killed. Follow the manufacturer’s directions exactly
when installing an infant or child restraint.

Installing The Child Restraint Using The Vehicle
Seat Belts
The seat belts in the passenger seating positions are
equipped with either an Automatic Locking Retractor
(ALR) or a cinching latch plate or both. Both types of seat
belts are designed to keep the lap portion of the seat belt
tight around the child restraint so that it is not necessary
to use a locking clip. The ALR will make a ratcheting
noise if you extract the entire belt from the retractor and
then allow the belt to retract into the retractor. For
additional information on ALR, refer to “Automatic
Locking Mode”.

The chart below defines the seating positions with an
Automatic Locking Retractor (ALR) or a cinching latch
plate.

Driver

Center

Passenger

CRS Lock

First Row

N/A

ALR

Second Row

ALR

Cinch

ALR

Third Row

ALR

N/A

ALR

• N/A — Not Applicable
• ALR — Automatic Locking Retractor

For Regular Cab Only