beautypg.com

Before you begin programming homelinkĥ, Before you begin programming, Homelink – Dodge 2012 Ram User Manual

Page 194

background image

The HomeLink

௡ buttons that are located in the overhead

console designate the three different HomeLink

௡ chan-

nels.

NOTE:

HomeLink

௡ is disabled when the Vehicle Secu-

rity Alarm is active.

Before You Begin Programming HomeLink

Be sure that your vehicle is parked outside of the garage
before you begin programming.

For more efficient programming and accurate transmis-
sion of the radio-frequency signal it is recommended that
a new battery be placed in the hand-held transmitter of
the device that is being programmed to the HomeLink

system.

Erase all channels before you begin programming. To
erase the channels place the ignition in the ON/RUN
position and press and hold the two outside HomeLink

buttons (I and III) for up 20 seconds. The Electronic
Vehicle Information Center (EVIC) will display “CLEAR-
ING CHANNELS”. Release the buttons when the EVIC
displays “CHANNELS CLEARED”.

HomeLink

Buttons

192

UNDERSTANDING THE FEATURES OF YOUR VEHICLE