Dodge 2013 Challenger SRT8 User Manual

Page 281

The operator can override the AUTO mode setting to
change airflow distribution by rotating the Mode Control
knob (right knob) to one of the following positions.
• Panel

Air is directed through the outlets in the instru-
ment panel. These outlets can be adjusted to direct

airflow.

NOTE:

The center instrument panel outlets can be aimed

so that they are directed toward the rear seat passengers
for maximum airflow to the rear.
• Bi-Level

Air is directed through the panel and floor outlets.

NOTE:

For all settings, except full cold or full hot,

there is a difference in temperature between the upper
and lower outlets. The warmer air flows to the floor
outlets. This feature gives improved comfort during
sunny but cool conditions.

• Floor

Air is directed through the floor outlets with a
small amount flowing through the defrost and

side window demist outlets.
• Mix

Air is directed through the floor, defrost, and side
window demist outlets. This setting works best in

cold or snowy conditions that require extra heat to the
windshield. This setting is good for maintaining comfort
while reducing moisture on the windshield.
• Defrost

Air is directed through the windshield and side
window demist outlets. Use this mode with maxi-

mum blower and temperature settings for best wind-
shield and side window defrosting.

UNDERSTANDING YOUR INSTRUMENT PANEL

279