Defibtech DDU-100 Series - Manual (Page 25)

17
DAC-510E-EN-BG
4 Using the DDU-100 AED
This chapter describes how to use the DDU-100 AED. The DDU-100 AED was designed for simple
operation, allowing the operator to focus on the patient. There are only two control buttons and
four light emitting diode (LED) indicators. Concise and easily understandable voice messages and
prompts guide the operator through the use of the unit.
The following sections describe in detail how to use the DDU-100 AED. The basic steps for use are:
• Turn the DDU-100 AED ON by pressing the ON/OFF button.
• Connect pads to AED if not yet connected.
• Place pads on patient (follow instructions on pad package).
• Follow voice prompts.
• Press SHOCK button if instructed by the AED.
4.1 Overview
Active Status
Indicator Pad
Connector
ON/OFF
Button
Indicator
LEDs
Speaker
Shock Button
check pads
do not touch patient
analyzing