Bax eq: front panel features & benefits – Dangerous Music BAX EQ User Manual
Page 6
2 |
DANGEROUS MUSIC
[
rear
panel
power
section
pictured
above
]
2. A/C CABLE & SWITCHING
Feature: Three pin IEC cable.
Benefit: Simple to replace if lost.
!
Feature: Selectable voltage.
Benefit: Travel with your favorite gear anywhere in the world while spreading the equalized truth. (“Equalised” in the UK!)
Operation: Please review the mains voltage in the red window before plugging in the unit or electrifying events may transpire. To
change it, use a screwdriver to gently pry the mains inlet module’s cover open and flip the fuse block around so the correct
voltage appears in the window.
Tip:
,
The power switch is on the inlet module. Seat the AC cable completely and use properly grounded power mains for safe
and quiet operation.
Tip:
,
If the BAX EQ will not power on and the power is known to be good, check the fuses under the inlet module’s cover. Use
500 milliamp fast blow for 120V (America) and 250 milliamp fast blow for 240V (Europe).
Bax EQ: Front Panel Features & Benefits
1. LOW FREQUENCY CUT FILTERS
[
low
frequency
cut
knob
pictured
above
]
Feature: Infrasonic rumble reduction.
Benefit:
infrasonic
rumble
is a PC term for the omnipresent low frequency garbage that loiters unnoticed in the audio shadows.
This headroom consuming thief propagates from HVAC units, jets, subways and yes, Rayleigh Waves (i.e. earthquakes and