D.A.S. Audio Action Series - Manual (Page 7)

7
action 215
- 2-way, full-range system
- 2 x 15" bass loudspeaker
- Compression driver with titanium diaphragm
- Two steel-reinforced handles
The action 215 is a 2-way passive full range loudspeaker utilizes two
15” bass loudspeakers for extra low frequency punch and higher SPL.
High frequencies are handled by a 1” compression driver with titanium
diaphragm. The trapezoidal cabinet is constructed using Birch plywood
and protected with a hard-wearing black paint finish. Two bar handles
and a steel grille sealed against corrosion using a polyamide powder
coat finish are provided. Rigging points provide a safe and simple way to
fly the
action 215 cabinets.
action 18
- Bass-reflex subwoofer system
- 18" low frequency transducer
- Precise and powerful bass reproduction
- Top located pole mount socket
The action 18 bass system incorporates a 18” low frequency
transducer with a 4 " voice coil mounted as a direct radiator into a bass-
reflex cabinet. The loudspeaker is protected by a perforated steel grille,
sealed against corrosion using a powder coat finish. The
action 18 is
designed for use in biamped systems. A top located pole-mount socket
permits mounting full-range systems above the
action 18 and two bar
handles makes moving easy.
action 218
- High output bass-reflex subwoofer system
- Twin 18" loudspeakers
- Durable black paint finish
- Side located bar handles
This high power bass-reflex subwoofer system uses dual 18" bass
loudspeakers equipped with 4" voice coils. The exceptional power
handling capacity and efficiency provide high sound pressure levels of
powerful bass. Two hand locations facilitate handling. The cabinet is
designed to be stacked in the vertical position in order to reduce the
units "on-stage" footprint.
Manual del Usuario / action passive series / User’s Manual
action 15
- Two-way, full-range system
- 15" bass loudspeaker
- Compression driver with titanium diaphragm
- Asymmetric enclosure design for stage monitor use
- Built-in rigging points (eyebolt based)
- Stand mountable
This 2-way passive full-range loudspeaker utilizes a 15” low
frequency transducer and a 1” exit compression driver with titanium
diaphragm. The cabinet is constructed of Birch plywood and finished
with an environmentally friendly black paint finish. Two bar handles are
provided and a steel grille protects components. A 35 mm tripod socket
allows for stand mounting. Rigging points provide a safe and simple
solution for suspending the
action 15.