D.A.S. Audio Artec 500 Series - Manual (Page 17)

AXU Mounting
AXF Mounting (only for Artec 508A & Artec 510A)
17
Introduction
The AXU series are designed for enclosures
artec 506A, artec
508A, artec 510A, artec 526A and different versions.
Introduction
The
AXF series are designed for enclosures artec 506A, artec 508A,
artec 510A and different versions.
Mounting instructions
You can consult the AXU mounting instructions for artec 500 series on
the web: www.dasaudio.com
Mounting instructions
You can consult the AXF mounting instructions for artec 500 series on
the web: www.dasaudio.com
Manual del Usuario / artec 500 active / User’s Manual
ACCESSORIES
Safety Precautions
Wall plugs provided are to be used in brick walls only. For other wall materials, source the suitable wall
plug before use.
D.A.S. Audio is not responsible for use other than the recommended or whether it be the result of
insufficient strength of the support structure. Use only the screws and wall plugs supplied on surfaces that
will provide sufficient support. Do not use on surfaces such as plaster, and gypsum. It is highly
recommended and in most parts of the world mandatory, that a safety cable be used to secure the enclosure
to the structure.
To ensure optimum safety, the installation should be checked thoroughly at regular intervals replacing all
deteriorated elements.
Loosen the screws before reorienting the speaker. Never force the rigging elements.
Contact a licensed rigger if there is any doubt.