D.A.S. Audio Road Series - Manual (Page 6)

6
The D.A.S. Road series stage monitors have been designed to enhance the artist's performance and
consequently the success of the event. The new Road series employs a two-way configuration and a
reduced enclosure size to provide a low profile design without sacrificing power handling or sound quality.
INTRODUCTION
CONFIGURATIONS
Manual del Usuario / road series / User’s Manual
The road is a 2-way powered stage monitor
that incorporates a 12R4 cone loudspeaker for
road 12A, or 15R4 for road 15A, for bass
reproduction. High frequencies are handled by an
M-75 compression driver with 1.5” exit, a 3”
titanium diaphragm and EFW voice coil. The 60° x
40° rotatable horn allows for high frequency
coverage options when the situation calls for it.
The biamplified system (Low:550W +
High:220W) uses a 3th generation Class “D”
amplifier. With a 24-bit DSP providing FIR (Finite
Impulse Response) filters, unparalleled control over
critical signal parameters can be accomplished. It
allow two EQ presets: Monitor & Main.
The monitor’s low profile design, side mounted
handles, and strategically located skid plates allow
for ease of use onstage. Hidden connector plugs
and indicator LEDs offer an undistractive reference
for the artist and a clean stage appearance.
Housed in the birch plywood enclosure finished
with durable Iso-Flex black paint and sturdy
speaker grilles for “performer’s abuse”, the
road is
available in Left or Right hand versions. F
he system has a pole mount socket, in one
of its handles.
or PA
use, t
HF drivers outside
(Recommended).
road 12AL
road 15AL
Mixer
LINK
road 12AL with road 12AR
or
road 15AL with road 15AR
road 12AR
or
road 15AR road 12AL
or
road 15AL
POWER
SUPPLY
POWER
SUPPLY POWER
SUPPLY
LINK