Olympus DS 2 - Manual (Page 94)

94
7
Windows
Macintosh
If this recorder is connected by USB, it
can function as a USB speaker. If the
recorder is used as a USB speaker, audio
output can be done through the recorder,
without audio output from the speaker
attached to the computer.
Select the [Select Audio Output] from the
[Tools] in the menu bar, and change the
output destination.
Uses as a USB Speaker
In order to use this recorder as a USB speaker or a USB microphone in DSS Player, it is
necessary to change to “AUDIO CLASS” after connecting to the computer in the “MASS
STORAGE” class. When changed for the first time, the driver will be installed into the computer.
After connection, execute the following settings.
USB Microphone/USB Speaker
The recorder can be used as a USB speaker or microphone when connected to a PC. If you
use the recorder as a USB speaker, you can output voice through the recorder instead of using
the PC speaker. When used as a microphone, you can record voice on your PC using your
favorite application.
Audio set up
1 Click the icon in the toolbar to change the recorder to Audio device.
1 From the [Tools] menu, select [Change to audio device].
USB Microphone/USB Speaker