Olympus DS 2 - Manual (Page 47)

47
4
1,2
Noise Cancel Function
If recorded audio is difficult to understand because of noisy surroundings, adjust the Noise
Cancel setting level. Noise will be reduced in the file when its played back for better sound
quality.
Noise Cancel Function
1 Press and hold the MENU/SET
button for 1 second or longer
while the file is playing.
Displays currently set Noise Cancel
level.
2 Press the MENU/SET button
again to choose a noise cancel
level.
The levels switch in the following
rotation, “OFF” “LOW” “HIGH”.
If the Noise Cancel level is set to “LOW”
or “HIGH”, the level setting is displayed
for 5 seconds when a file is played back.
To change the Noise Cancel level setting,
press the MENU/SET button while the
level setting is displayed.
....................................................................................................................................................
Notes
• If you set it to “LOW” or “HIGH”, the display flashes the Noise Cancel level for about 5 seconds when a file
is played back.
• If you set Noise Cancel to “LOW” or “HIGH”, the setting remains valid until it’s set to “OFF”.
• Noise cancel cannot be used during fast playback/slow playback (
☞ P.35).
• If the noise cancel is set to the file recorded in Stereo HQ or Stereo SP mode, it will be played back in
monaural.