Olympus DS 2 - Manual (Page 14)

14
1
If you have set the time and date, information as to when an audio file is recorded is stored
automatically with that file. The time and date should be set to ease file management tasks.
Also, it is required when performing timer recording (
☞ P.28) and alarm playback (☞ P.48).
The hour indicator will flash automatically when you load batteries before using the
recorder for the first time, or after the recorder hasn’t been used for a long time.
Proceed from step 1.
Setting Time/Date (TIME&DATE)
Setting T
ime/Date (TIME&DA
TE)
STOP button
(Exits the menu)
MENU/SET
button
(Accepts a choice
and moves on to
the next item)
2 button
(Alters a choice)
3 button
(Alters a choice)
PLAY button
(Switching the
data displayed.)
1 Set the hour.
1 Press the 3 button or 2 button to set
the hour.
2 Press the MENU/SET button to accept
the hour.
• You can choose between 12 and 24 hour
display by pressing the PLAY button while
setting the hour and minute.
Example: 5:45 P.M.
5:45 PM
←→ 17:45
(Initial setting)
2 Set the minute.
1 Press the 3 button or 2 button to set
the minute.
2 Press the MENU/SET button to accept
the minute.
3 Set the year.
1 Press the 3 button or 2 button to set
the year.
2 Press the MENU/SET button to accept
the year.
• You can choose the order of the year,
month, day by pressing the PLAY button
while setting them.