D.A.S. Audio LX Series User Manual

Page 9

SYSTEM DESCRIPTION

The maximum number of units that can be

stacked on any of the dollies is three (3). The

LX-

215R/LX-215RA and LX-218CR/LX-218CRA are
equipped with a front located dolly panel (

PL-LX215

and the

PL-LX218C) which is attached by way of

the rigging hardware.

Other interesting accessories have been

compiled in the Table of Accessories graph below.
In the RIGGING SECTION, more detail is provided
for the accessories mentioned below.

The

LX-212A and LX-215A powered versions

incorporate an 1800 W Class D amplifier with
switch mode power supply (SMPS) and digital
signal processing (DSP). The amplifier has a
Cardioid Preset mode switch which offers specific
signal treatment for easy set-up of pairs of
systems in cardioid subwoofer applications. The
system includes two balanced inputs (A-B) with
stereo filtered output connections for satellite
systems which can be defeated to offer stereo
“loop thru” connections. With the filter activated,
the cross-over frequency for the satellite systems
is 100 Hz. The variable low-pass filter ranges from
100 Hz-160 Hz (satellite outputs are not affected)
and can be adjusted by way of the rotary knob. A
gain control and polarity reverse feature increase
user control over the system.

The

LX-218CA and LX-218CRA powered

versions incorporate a 2400 W Class D amplifier
with switch mode power supply (SMPS) and digital
signal processing (DSP). The amplifier has a
Cardioid Preset mode switch which offers specific
signal treatment for easy set-up of pairs of
systems in cardioid subwoofer applications. The
system includes a balanced input and balanced
output connection for satellite systems which can
be defeated to offer “loop thru” connection.

The

LX series subwoofers from D.A.S. Audio are

systems which use twin

LXN long excursion

loudspeakers

incorporating

light

weight

neodymium magnet assemblies and the efficient
TAF (Total Air Flow) heat evacuation scheme. The
units are ideal for applications requiring high level
sub-bass extension in mid to large-scale
outdoor/indoor events in arenas, stadiums or
theaters.

The

LX enclosures are constructed of 18 mm

birch plywood finished with the durable Iso-Flex
black paint. The rectangular shape facilitates
stacking and use in cardioid configurations. Both
the dual 12" and the dual 15” units have been
designed as 6th order band-pass subwoofer
systems and incorporate the

12LXN and 15LXN

loudspeakers respectively. The double 18” unit
uses the

18LXN loudspeaker and presents a bass-

reflex configuration.

Four versions are available for each model-two

passive versions, and two powered versions
indicated by the letter “A” at the end of the model
number. “R” versions are equipped with a captive
rigging system that is compatible with D.A.S. Aero
line array system accessories. As such, the model
denominations for the dual 12” systems would be
LX-212, LX-212A, LX-212R, LX-212RA. The dual 15”
models are

LX-215, LX-215A, LX-215R, LX-215RA

and the dual 18” models

LX-218C, LX-218CA, LX-

218CR and LX-218CRA.

To make transporting the systems easier, each

of the

LX systems has an optional dolly platform.

The

PL-212S corresponds to the LX-212 and its

different versions. Accordingly, the

PL-215S and PL-

218CS correspond to the LX-215 and LX-218C
respectively.

LX-212

LX-215

LX-218C

With pole mount socket for TRD-6

YES

Rigging

AX-LX212

AX-LX215

AX-AERO50

Rigging kit

KITR-LX212

KITR-LX215

KITR-LX218C

To transport

PL-212S

KITW-100

PL-215S

PL-218CS

To combine with other systems

PICK-UP AX-LX212

PICK-UP AX-LX215

PICK-UP AX-AERO50

PICK-UP 8212

AX-COMBO1512

AX-COMBO12

Table of Accessories

Manual del Usuario

LX series / User’s Manual