Casio EXILIM EX-H10 - Manual (Page 94)

94
Other Playback Functions (PLAY)
Procedure
[p] (PLAY) * Movie Screen of Movie to be Edited * [MENU] *
PLAY Tab * Movie Editing
The Movie Editing feature lets you use one of the following procedures to edit out a
specific part of a movie.
1.
Use [8] and [2] to select the editing method you want to use and then
press [SET].
2.
Use [4] and [6] to scroll through the movie and
search for the frame (point) from which or to
which you want to cut the movie (the cut point).
• You also can search for the cut location by playing
back the movie and pressing [SET] to pause. During
playback, you can press [4] or [6] to perform fast
reverse or fast forward.
3.
When the frame where you want the cut point to
be is displayed, press [2].
Editing a Movie on the Camera (Movie Editing)
Cut
(To-Point Cut)
Cuts everything from the beginning of the movie up to the
current location.
Cut
(Point-To-Point Cut)
Cuts everything between two points.
Cut
(From-Point Cut)
Cuts everything from the current location to the end of the
movie.
Cut
(To-Point Cut)
While the frame you want the cut to be up to is
displayed, press [2].
Cut
(Point-To-Point Cut)
1 While the frame you want the first (From) cut to be is
displayed, press [2].
2 While the frame you want the second (To) cut to be
is displayed, press [2].
Cut
(From-Point Cut)
While the frame you want the cut to be from is
displayed, press [2].
}
~
¡
Cut range (red)
}
~
¡