Clippasafe 122 Pressure Fit Gate - Manual (Page 2)

Pre-Installation Advice
WARNING - NEVER USE WITHOUT WALL CUPS
WARNING - GATE MUST BE FITTED UPRIGHT
AS SHOWN
WARNING - THE GATE SHOULD BE POSITIONED
SO THAT IT OPENS AWAY FROM THE STAIRS
WARNING - INCORRECT FITTING
OR POSITIONING OF THIS SAFETY
BARRIER CAN BE DANGEROUS
Fixing surfaces must be suitable
for the purpose and structurally
sound.
This product requires the purchase
of appropriate fixing aids suitable
for the surface to which the wall
cups are to be fitted.
If this gate needs to be fitted to
a round shaped newel post,
‘Y’ shaped spindles are available
separately which replace the screw
adjusters and wall cups supplied
with this gate.