Chamberlain WD962KEV - Manual (Page 45)

7702CB Outside Quick Release:
Required for a garage with NO
access door. 41A5281 Extension Brackets:
(Optional) For safety reversing
sensor installation onto the wall or
floor. CLSS1 System Surge Protector:
The Garage Door Opener
Surge Protector is designed to
protect Chamberlain garage
door openers against damage
from lightning and power
surges. Easy to install. 953EV Remote Control:
Works with ALL Chamberlain openers from
1993-present. MyQ
® compatible. Includes
visor clip.
8808CB 8 Foot (2.4 m) Rail Extension:
To allow an 8 foot (2.4 m) door to
open fully. PILCEV MyQ ® Remote Light Control:
Control home lighting and garage
doors with one remote. For use with
plug-in lamps. Synchronize to work
with MyQ
® compatible garage door
openers and remote controls.
AGDMEV Garage Door and Gate
Monitor:
Monitor open/closed status for
up to 4 MyQ
® compatible
garage door openers and
close them from anywhere in
the home.
956EV Keychain Remote Control:
Works with ALL Chamberlain openers from
1993-present. MyQ
® compatible. With key
ring.
8810CB 10 Foot (3 m) Rail Extension:
To allow a 10 foot (3 m) door to
open fully. CLLP1 Laser Parking Assistant:
Park in the right spot every time! A
laser beam is activated by your
garage door opener and projected
on to the dashboard of your vehicle
to guide perfect parking. BIK01 Installation Upgrade Kit:
The Installation Upgrade Kit
includes all components
needed to hang garage door
openers up to 24" (61 cm) from
the ceiling. 940EV Wireless Keypad:
For use outside of the home to enable
access to the garage using a 4-digit PIN.
Works with ALL Chamberlain openers from
1993-present. MyQ
® compatible.
41A6357-1 Standby Power System
Battery:
Provides backup power to the
garage door opener.
44
Accessories