CLEAR 4G+ USB S Series Users Guide - Manual (Page 6)

5
Set up the Mobile USB (continued)
Read the CLEAR Terms of Service
Connect to the Network
Connect to the Internet
Before you get online, the CLEAR Connection Manager must be running.
If you’re using a computer, with Microsoft Windows®, your CLEAR Connection Manager starts
running automatically, when you insert the Mobile USB into an available USB port on your computer.
If you’re using a device with a Mac® operating system, you need to open the CLEAR Connection
Manager.
After the CLEAR Connection Manager is
installed, the Mobile USB will automatically
connect to the network and a window will display
the CLEAR Terms of Service.
After you’ve read and accepted the CLEAR
Terms of Service (and you’re in CLEAR 4G
coverage), the CLEAR Connection Manager will
initialize and read, “Ready to connect to 4G
WiMAX”.
Select “connect” to access the network.
Note: If you’re in a 3G coverage area, the
CLEAR Connection Manager screen will read
“Ready to connect to 3G.”
You’re connected and ready to use the internet.