Shift lever override – Chrysler 2014 200 Convertible - User Guide User Manual
Page 91
WARNING!
•
When temperatures are below the freezing point, electrolyte in a discharged battery may
freeze. Do not attempt jump-starting because the battery could rupture or explode and
cause personal injury. Battery temperature must be brought above the freezing point
before attempting a jump-start.
•
Take care to avoid the radiator cooling fan whenever the hood is raised. It can start anytime
the ignition switch is on. You can be injured by moving fan blades.
•
Remove any metal jewelry, such as watch bands or bracelets, that might make an
inadvertent electrical contact. You could be severely injured.
•
Batteries contain sulfuric acid that can burn your skin or eyes and generate hydrogen gas
which is flammable and explosive. Keep open flames or sparks away from the battery.
•
Do not allow vehicles to touch each other as this could establish a ground connection and
personal injury could result.
•
Failure to follow this procedure could result in personal injury or property damage due to
battery explosion.
•
Do not connect the cable to the negative post (-) of the discharged battery. The resulting
electrical spark could cause the battery to explode and could result in personal injury.
SHIFT LEVER OVERRIDE
• If a malfunction occurs and the shift lever cannot be moved out of the PARK position, you can
use the following procedure to temporarily move the shift lever:
• To access the shift lever override, remove the cupholder liner.
• Firmly set the parking brake.
• Turn the ignition switch to the ACC or ON position without starting the engine.
• Press and maintain firm pressure on the brake pedal.
• Using a screwdriver or similar tool, press and hold the override tab through the access port
on the center console.
• Move the shift lever into the NEUTRAL position.
• The vehicle may then be started in NEUTRAL.
• Reinstall the override cover.
W H A T T O D O I N E M E R G E N C I E S
89