beautypg.com

Phone pairing – Chrysler 2014 200 Convertible - User Guide User Manual

Page 66

background image

NOTE:
The Uconnect® Phone requires a mobile phone equipped with the Bluetooth® Hands-Free
Profile, Version 1.0 or higher. For Uconnect® Customer Support: U.S. residents - visit
www.UconnectPhone.com

or

call

1–877–855–8400.

Canadian

residents

-

visit

www.UconnectPhone.com or call, 1-800-465–2001 (English) or 1-800-387-9983 (French). This
site will provide specific instructions based on the type of mobile phone being paired.

Phone Pairing

NOTE:
Pairing is a one - time initial setup before using the phone. Prior to starting the pairing procedure
ensure all additional phones within the vehicle have their Bluetooth® disabled.

• Press the “Phone”

button to begin.

• Wait for the “ready” prompt and BEEP.

• After the BEEP, say ”setup” or “Uconnect device setup.”

• After the BEEP, say “device pairing.”

• After the BEEP, say “pair a device.”

• Follow the audible prompts.

• You will be asked to say a four-digit Personal

Identification Number (PIN), which you will
later need to enter into your mobile phone.
You can say any four-digit PIN. You will not
need to remember this PIN after the initial
pairing process.

• You will then be prompted to give the phone pairing a name (each phone paired should have

a unique name).

• Next you will be asked to give this new pairing a priority of 1 through 7 (up to seven phones

may be paired); 1 is the highest and 7 is the lowest priority. The system will only connect to the
highest priority phone that exists within the proximity of the vehicle.

• You will then need to start the pairing procedure on your cell phone. Follow the Bluetooth®

instructions in your cell phone Owner's Manual to complete the phone pairing setup.

E L E C T R O N I C S

64