Chrysler 2011 300 SRT - User Guide - Manual (Page 46)

Pairing a Phone
• To use the Uconnect™ Phone feature, you must first pair your bluetooth phone with the
Uconnect™ system.
Start pairing procedure on the radio
• Touch the Phone soft-key and then the Settings soft-key. Next, touch Add Device.
• Uconnect™ Phone will display an “In progress” screen while the system is connecting.
Start pairing procedure on mobile phone
• Search for available devices on your
Bluetooth® enabled mobile phone. This is
usually within Settings or Options under
“Bluetooth”. See your mobile phone’s manual
for details.
• When your phone finds the system, select
“Uconnect” as the paired device.
Complete the pairing procedure
• When prompted on the phone, enter the 4-digit PIN number shown on the Uconnect Touch™
Screen.
• If your phone asks you to accept a connection request from Uconnect, select “Yes”. If available,
check the box telling it not to ask again – that way your phone will automatically connect each
time you start the vehicle.
Select the mobile phone's priority level
• When the pairing process has successfully
completed, the system will prompt you to
choose whether or not this is your favorite
phone. Selecting Yes will make this phone the
highest priority. This phone will take
precedence over other paired phones within
range. Only one phone can be paired at a
time.
• You are now ready to make hands-free calls.
Press the Uconnect™ Phone button on your
steering wheel to begin.
ELECTRONICS
44