Chrysler 2009 Country - Owner Manual - Manual (Page 167)

4. Insert pole into base by aligning the lock button into
notch of the base.
5. Twist the pole in a clockwise rotation until it stops.
NOTE: You will hear an audible “click” when the lock
button engages the base.
6. Place the table top over the installed pole aligning
with the mating feature of the underside of the table top.
Apply pressure on the table top and press downward.
NOTE: You will hear an audible “click” when the table
latch engages the pole.
WARNING!
Failure to comply with the following conditions
could result in serious injury or even death:
• DO NOT install the table while vehicle is in
motion.
• NEVER drive the vehicle with only the pole in-
stalled.
• DO NOT place heavy or sharp objects on table.
(Continued)
Installing Table Leg Into Base
1 — Table Base 2 — Lock/Release Button
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165