Chrysler 2009 Aspen - Quick Reference Guide - Manual (Page 9)

Clock Setting
nOn-TOUcH-ScrEEn rAdiOS
• Press and hold the TiME button until the hours blink; turn the
TUnE/ScrOLL control knob to set the hours.
• Press the TUnE/ScrOLL control knob until the minutes begin to
blink; turn the TUnE/ScrOLL control knob to set the minutes.
• Press the TUnE/ScrOLL control knob to save the time change.
TOUcH-ScrEEn rAdiOS
• Turn the radio On.
• Touch the screen where the time is displayed.
• Touch the screen where “User clock” is displayed
(navigation radio Only).
• To adjust the hours, touch either the hour forward button
or the hour backward button.
• To adjust the minutes, touch either the minute forward button
or the minute backward button.
• To save the new time setting, touch the screen where the word
“Save” is displayed.
Driver Power Seat Adjustment
• The recline switch, located on the outboard side of the seat,
controls seatback adjustment.
• The seat switch controls forward/back, up/down, and
tilt adjustment.
Driver Memory Seat
• The memory seat feature allows you to save two different driver
seating positions. The memory seat switches are located on the
driver’s door panel. with the key in the On/rUn position,
push , then push 1 or 2 within five seconds.
• Push 1 or 2 to recall the saved positions.
• key fobs may be programmed to automatically recall position 1 or
2 when UnLOck is pushed.
• refer to Owner’s Manual for further details.