Chrysler 2009 Aspen - Quick Reference Guide - Manual (Page 8)

Turn Signals/Wiper/Washer/High Beams Lever
TUrn SignALS/LAnE cHAngE ASSiST
• Tap the lever up or down once and the turn signal (right or left)
will flash three times then automatically turn off.
wiPErS
Intermittent, Low and High Operation
• rotate the end of the lever to the first detent position for one of five
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Washer
• Push the end of the lever in and hold for as long as spray is desired.
High Beams
• Pull the lever toward you past the detent to activate the
High Beams.
• A High Beam symbol will illuminate in the cluster to indicate the
High Beam lights are on.
Rear Wiper/Washer
• A rotating switch on the climate control turns the rear wiper
On/Off. Pushing this switch inward activates the rear washer.
Wind Buffeting
• wind buffeting can be described as a helicopter-type percussion
sound. if buffeting occurs with the rear windows open, adjust the
front and rear windows together.
• if buffeting occurs with the sunroof open, adjust the sunroof
opening, or adjust any window. This will minimize the buffeting.
Washer
Wipers
Pull Lever for
High Beams