Chrysler 2009 300 - Quick Reference Guide - Manual (Page 9)

Clock Setting
non-ToUcH-ScrEEn rAdioS
• Press and hold the TiME button until the hours blink;
turn the TUnE/ScroLL control knob to set the hours.
• Press the TUnE/ScroLL control knob until the minutes begin
to blink; turn the TUnE/ScroLL control knob to set the minutes.
• Press the TUnE/ScroLL control knob to save the time change.
ToUcH-ScrEEn rAdioS
• Turn the radio on.
• Touch the screen where the time is displayed.
• Touch the screen where “User clock” is displayed
(navigation radio only).
• To adjust the hours, touch either the hour forward button
or the hour backward button.
• To adjust the minutes, touch either the minute forward button
or the minute backward button.
• To save the new time setting, touch the screen where the word
“Save” is displayed.
Electronic Vehicle Information Center
(EVIC) Controls
• The Evic features a driver interactive display that is located
in the instrument cluster. Pressing the controls on the steering wheel
allows the driver to select vehicle information and Personal Settings.
• refer to owner’s Manual for further details.
Manual Tilt/Telescoping Steering Wheel
• The control handle is located below the steering wheel at the end
of the steering column.
• To unlock, pull the handle toward you.
• Move steering wheel up, down, in or out to desired position,
then push handle away from you to lock into place.
• if your vehicle is equipped with power tilt/telescoping steering
wheel, refer to owner’s Manual for operation.
175477_300_QRG_100908.indd 11 4/24/09 1:52:34 PM