Chrysler 2009 300 - Quick Reference Guide - Manual (Page 8)

Turn Signals/Wipers/Washer/High Beam Lever
TUrn SignALS/LAnE cHAngE ASSiST
• Tap the lever up or down once and the turn signal (right or left) will
flash three times and automatically turn off.
FronT WiPErS
Intermittent, Low and High Operation
• rotate the end of the lever to the first detent position for one of six
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Mist
• Push the end of the lever inward to the first detent when a single
wipe is desired.
Rain Sensing Wipers
• This feature senses moisture on the vehicle’s windshield and
automatically activates the wipers for the driver when the switch
is in the intermittent positions. refer to owner’s Manual.
Washer Operation
• Push the end of the lever inward to the second detent and hold for
as long as spray is desired.
HigH BEAM oPErATion
• Push the lever forward to activate the beams.
Wind Buffeting
• Wind buffeting can be described as a helicopter-type percussion
sound. if buffeting occurs with the rear windows open, adjust the
front and rear windows together.
• if buffeting occurs with the sunroof open, adjust the sunroof
opening, or adjust any window. This will minimize the buffeting.
Washer
(Push to Second Detent)
Mist
(Push to
First Detent)
Wipers
Push Lever
for High Beams
175477_300_QRG_100908.indd 6 4/24/09 1:52:02 PM