Toshiba SL39N Series - Manual (Page 7)

Name of Key & Lamp Function
TARE Key « >
LJ
1) Used to subtract tare weight.
2) Used to preset tare weight beforehand through the numeric keys.
3) Used to clear the tare weight.
PRINT Key
PRINT
When the SL39N is connected to the H-18 scale printer, this key
activates the print mechanism and a label is issued. This function can
only take place when the control switch on the H-18 is set in the
"MANUAL" or "BY COUNT" position.
PLU Key j------------ 1
L zj
Used to recall and display the PLU data which is stored in the H-18
scale printer.
Numeric Keys
□ □ □
□
□□
[D Q Q
□
1) In standalone mode, these keys are used to enter unit price and
tare weight.
2) When the SL39N is connected to the H-18, these keys are used to
enter PLU number, unit price, and tare weight.
\ 1 /
NET Lamp Lights when tare is subtracted.
\ i /
PREPACK Lamp Liohts when SAVE 1 kev is pressed.
NOTES:
(1) The Load Cell in the unit is turned ON when the power plug is connected to the AC outlet. The power of
the load cell cannot be turned OFF by the IPOWER/ZEROI key.
(2) When the
I
POWER/ZERO
I
key is turned on within about 16 seconds after the power plug is connected
to the AC outlet, the test scanning sequence is made, ZEROs are displayed and the scale is ready for
use.
(3) When the
I
POWER/ZERO
I
key is turned on over about 16 seconds after the power plug is connected to
the AC outlet, all "8"s appear on all displays for a moment, then ZEROs are displayed and the scale is
ready for use.