Toshiba TEC SL57 SERIES User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10-4. Tare Function Procedures
There are two kinds of tare subtraction procedures, one is "Direct tare", another is "Preset tare
[
Mode SW. (1): WEIGH or FIX 1
Mode SW. (2): MANUAL J
(1) Place tare weight on the platter.
(2) Press [T].
(3) Start the weighing or fix price
operation.
(4) The label is issued.
(5) Remove the article together with
tare.
NOTE; Tare weight subtraction is available with up to 30 lbs. When tare weight subtraction is in
operation, however, the scalable range for net weight becomes less by the amount of the tare.
(Net weight = Gross weight - Tare weight)
NOTE: When the tare weight exceeds 0.20 lbs with the Mode SW.(2) set to AUTO position, one tare
label will be issued automatically. To prevent this, set the Mode SW. (2) to MANUAL position.
- 14