Removal and replacement of label roll – Toshiba TEC SL57 SERIES User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8. REMOVAL AND REPLACEMENT OF LABEL ROLL

1. Remove the printer cover and side cover.

Then pull the head-up lever to arrow direction.

Head-up Lever

2. Remove the core of the label roll and the label

backing paper.

NOTE: To remove the label backing paper,

loosen the paper by turning the paper

clockwise

and

remove

the

paper

stopper.

Be careful to never turn the paper

winding shaft clockwise.

Referring to the figure on the right, set the label

roll on the unit.

Label End Sensors

3. Push down the printer head, and close the

covers.

NOTE: When the label roll is replaced, press

the feed key to confirm that the label

is issued correctly.

- 8 -