Toshiba TEC EMl-31055 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EMI-31055
13. ACTION FOR ERROR MESSAGES
Take the following action if an error message appears on the commodity name display with the buzzer
sounding.
• Label Issue Mode
Control lock: REG./MARK DOWN/REWRAP
Message
Cause
Solution
DATA ENTRY ERROR
Error in key input.
Depress the 0 key, and re-input.
PLU NOT FOUND
The PLU# being called out is not
registered.
Depress the [C] key, and check
the PLU data.
TOTALS OVERFLOW
GRAND TOTAL or PLU TOTAL
memory has overflowed at the
time of issuing a label.
Depress the key, and turn the
control lock at "Z" position. Then
sum up the overflowing memory.
PLU DATA ERROR
Error of PLU data.
Depress the [C] key, and check
the PLU data.
PRT FAILURE DETECTED
Printer trouble.
1. Check that the label and printer
head are set correctly.
2. If the label home position is
misaliqned. press the iFEEDI
key.
CASSETTE ERROR
Label cassette is not set correct
ly.
Set the cassette correctly.
Cassette switch is not set cor
rectly.
Set the cassette switch
correctly.
Setting of control lock position
and cassette switch is not cor
rect.
When control lock position is set to
other than "X" or "Z", set the cas
sette switch to "LABEL POSITION".
LABEL SENSE ERROR
The label interrupts the sensors.
Depress the [C] key, then the
IFEEDI kev. and remove the label.
- 44 -