Toshiba TEC EMl-31055 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM1-31055
NOTES:
1.
—„^Description
Error Name
Error Description
Received Text *1
Cause
SEND
RECEIVE
Error Name
7-seg.
P U Ml
М2
Р и Ml
М2
HARD ERROR
01
Parity error
О
О
Hard error
02
Overrun error
04
Framing error
DATA ERROR
08
Verify error
X
О
Compared contents do not
correspond.
10
Character over error
о
Hard error
20
BCC error
BCC is not correct
40
Data error
X
о
X
X
о
X
•3
TIME OUT
ERROR
80
Timeout error
О
О
Text with designated time has not
been received.
О
: Error occurs
X : No error occurs
P:
U;
Ml:
М2:
*2
*3
PLU + ING
UNIT PRICE
MISC. 1 (ADDRESS, LOGO)
MISC. 2 (SPEED KEY)
When several error occur at the same time, all relevant data are added and
displayed in the 7-segment display.
Cause of Errors
Q RAM for LOGO does not exist when LOGO is selected in initial set.
(D Transmitted LOGO data exceeds the number of dots to be colored selected in
the initial set.2.
2. Data is automatically received in registration mode. However, scale operation stops
during reception.
3. After clearing an error, the registration initial display is shown. Data other than head
data is not received.
4. When the header text is received, all contents previously set are cleared.
- 35 -