Toshiba TEC EMl-31055 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EM 1-31055
11-11. Setting Automatic Display Switching Time
When initial set #6-4 is set to "2” (standard), it is available to specify the time before a scrolling
message appears automatically on hte commodity name display after a label has been issued
or after "ENTER THE PLU#" has been displayed.
Control lock: REG, M.DOWN, or REWRAP
Mode SW(2); WEIGH, BY COUNT, or FIX
Depress:
Enter the special code "20'
Set the time.
(1 ~ 99 sec.)
Depress:
PRT/*
ENTER THE PLU #
PROG.
PACKED ON DATE
ON
0
2
ENTER THE TIME
ENTER THE TIME
40
3
Current setting time
ENTER THE TIME
15
ENTER THE TIME
15
ENTER THE PLU #
NOTE: Automatic display switching occurs provided the control lock is set to "REG", "MARK DOWN'
or "REWRAP". It does not occur if the unit price has been saved.
- 31 -