Notes on use and installation, Do not aim the camera at the sun, Do not shoot intense light – Toshiba IK-WB15A User Manual
Page 11: Treat the camera with care, Never touch internal parts, Install the camera where no video noise appears, Check the ambient temperature and humidity, Should you notice any trouble
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0°o
NOTES ON USE AND INSTALLATION
Do not aim the camera at the sun
Avoid aiming the camera at the sun with or without power applied.
Do not shoot intense light
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe
may appear on the screen. However, this is not a malfunction.
Treat the camera with care
Do not drop the camera or subject it to strong shock or vibration. Otherwise,
the camera may malfunction.
Never touch internal parts
Do not touch the internal parts of the camera other than the parts specified.
Otherwise, the camera may malfunction.
Install the camera where no video noise appears
Install the camera away from video noise. If cables are wired near electric
lighting wires or a TV set, noise may appear in images. In this event, relocate
cables or reinstall equipment.
Check the ambient temperature and humidity
Avoid using the camera where the temperature is hotter or colder than specified.
Otherwise, the quality of images may deteriorate or internal parts may be
affected. Special care is required to use the camera at high temperature and
humidity.
Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and
contact your dealer. Continued use in this state might cause fire or electric
shock. For details on repair, consult the place of purchase, or please contact
the technical support number.