Main control lock – Toshiba TEC SL59 SERIES User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
El-04^89
6. MAIN CONTROL LOCK
The control lock has eight marked positions.
There are four control keys which will operate these locks, these are:
This key (OP) will access the
REG and OFF positions.
This key (MAI) will access the
PR2, PR1, REG, OFF and X po
sitions.
This key (MA2) will access the
PR2, PR1, REG, OFF, X and Z
positions.
This key (SE) will access all
eight positions.
(SE key may be kept with your
TEC representative for servic
ing.)
PR2
PR1
REG
OFF
X
Date, time, machine No., store code, store address. Bar Code Format, and PLU can be pro
grammed.
PLU unit price, direct key and Spacing of a label etc. can be programmed or changed.
Machine can be used as a scale and register the data on a label.
Machine is locked and any further key entry is impossible.
Day-Total etc. can be read out and printed out on the paper or label.
The data-memory is not reset to zero.
'
Day-Total etc. can be printed out on the paper or label and the data-memory is reset to zero.
Used to clear all memories (all Total and PLU file).
(Depress Key).
(RAM CLEAR)-------
(TEST)--------- ;—- Used to indicate all test status in displays.
7 -