Toshiba TEC SL59 SERIES - Manual (Page 11)

El'04189
8. CASSETTE MAGNETIC TAPE OPERATIONS
The SL59 is designed to interface with a cassette magnetic tape. This tape unit allows the transfer of the
entire PLU file from the SL59 to the tape. This can be accomplished using a number of operation steps. In
turn, information from the tape can also be transferred to other SL59.
1) SAVE(SL59 - CMT)
Control lock: PR1 position
j
Start the tape to be recorded after entire rewinding.
Index
I
1
I
Confirm the magnetic painted part of tape running the Head.
(Over 5 sec. after Starting.)
Depress: SAVE key
2) SAVE Comparison
Rewind the tape entirely again.
Start the CMT to play (Not recording).
Index I 2 I
I
Depress: SAVE key
3) Load (CMT - SL59)
Start the CMT to play (Not recording).
Index
I
3
j
Depress: SAVE key
4) Load Comparison
Same procedures as "SAVE comparison".
5) Errors
Comparison Error (-4):
Header Error (-2):
Time Over Error (-3):
Hard Error (-1):
Warning for being different points after comparison.
Warning for the use of another Spec. Tape. '
Warning for being over time (14 seconds) after depressing ! SAVE
key in Load and Comparison (Not save operation).
Warning for the status Error.
NOTE 1: The error mode can be released by depressing [ C | key, and try to operate again according to
the above steps.
2: When SAVE operation (SL59 CMT) cannot be executed in 4 seconds after depressing
SAVE key, it will result in Time over error mode.
- 10 -