Direct channel access, Scanning – Uniden UBC144XLT User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Scanning
LOCKOUT )
Q
HEViB
(/^SCAN ) ( • MA№
Turn on the power, or press (•
scah
) to start scanning,
(When the scanner is turned on, it is automatically in
Scan mode.)
Scanning stops on any active channel automatically,
except those channels programmed with (
l
^
out
) .
Scanning resumes automatically 2 seconds after the
channel becomes inactive.
Press O
mmual
) anytime to stop scanning. When you press
C*
manual
)
, you are out of Scan mode, and the scanner
remains on the displayed channel.
Press (■ sc^) to start scanning again, or press C*“*w<*0 to
step up 1 channel.
You can press
repeatedly to manually scan all 16
channels, 1 press per channel, including the channels that
are locked out.
Direct Channel Access
This feature allows you to instantly access a specific channel you want to monitor.
Example: Select Channel 4.
Press
C5D-
Press (•
hwma
C)
When you press (
a
D. the display changes to "4", but the scanner still monitors the
previous channel displayed. You must press (»mwAi) to successfully complete the
direct access to Channel 4.
10