Uniden LTD 715 - Manual (Page 4)

CONTROLS AND INDICATORS
NOTE: For details of use of these Controls, see the OPERATION
section
FRONT PANEL
CONTROLS
12
1. VOL (On/OffA/olume) - Turns the LTD 715 power On or Off and
varies the audio ouput.
2. WX (Weather) - Used to scan only Weather Channels 0 - 9.
3. DIM - This control is used to adjust the brightness of the LCD Panel
backlight, and the brightness of the TX indicator. The LCD Panel
backiight and TX indicator are at the brightest level when the LTD
715 is turned on.
4. H/L (Migh/Lovv) - Controls transmitter output power f25 Waft, where
allowed, or 1 Walt). The output power is 25 Watts wnen the LTD
715 is turned on.
5. US/1 (United States/International) - Switches operation between
US and International Channels.
6. SCN (Scant - Used to start timed Scan (SEEK), switch to standard
Scan (SCAN), and to resume scanning when stopped on a Channel.
7. DAN (Dual Watch) - Turns Dual Watch On/Off.
8. C16 (Channel 16) - Controls access to instant Channel 16
communications.
9. Rotary Channel Selector - This control is used to manually select
the desired Communication Channel (01 - 28 and 60 - 88), or
Weather Channel (0 - 5).
10. LCD Panel - Indicators for DUAL, SEEK, SCAN, USA, INT’L, HI,
LO, WX, and Channel Number.
NOTE: Refer to “INDICATORS" for detailed indicator descriptions.
11. SQ (Squelch) - Eliminates the background noise when no signal is
being received.
12. Press-To-Talk Switch - Press to transmit; release to receive.
INDICATORS
18 19 2021
22
13. LCD Numerical Channel Display - Indicates Channel Number in
use. Weather Channels are displayed as single digits. (Example: 0,
1,2, 3, etc.) Communication Channels are displayed as two digits
(Example: 01,02, 03, etc.),
NOTE: LCD Status Indicators appear when status is selected by
pressing the corresponding button.
14. INT’L (International) - Indicates International Channel Mode.
15. USA - Indicates US Channel Mode.
16. SCAN - Indicates Normal Scan Mode.
17. SEEK - Indicates Timed Scan Mode on Communication Channels.