Uniden UH-088 - Manual (Page 17)

Programming Scan Channels
1. Select which Scanning Mode you
wish to use on the channel.
OS or GS Mode
Note: OS is indicated by the
absence of the GS icon.
2. Select the channel you want to
store.
3. Press and hold MEM for 1.5 sec. to
store. MEM icon appears and a
short tone beep is heard.
08 1
Hisses^ 1 1
4. To remove the channel from Memory, press and hold MEM for 1.5 sec. once more.
Two successive beeps are heard and the MEM icon disappears.
16