Installation – Uniden MC480 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

INSTALLATION
CAUTION: The MC480 will operate only with nominal 12 volt negative
ground battery systems.
It is important to carefully determine the most suitable location for your MC480
on your vessel. Electrical, mechanical, and environmental considerations must all be
taken into account. You must select the optimum relationship among these con
siderations.
Keep in mind the flexibility designed into the MC480 so that you can most con
veniently use your radio. Features which should be considered are;
1. Universal mounting bracket may be installed on either top or bottom for shelf,
bulkhead, or overhead mounting.
2. The microphone connector face forward allowing convenient in-dash or “built-
in" installations.
3. The front panel can be fully reversed to provide for optimum viewing and
operating for any mounting position. (See page 5)
4. The REMOTE speaker jack may be used with an auxiliary speaker.
All connections are "plug-in" type for easy removal of the radio.
- 4 -