Uniden MC480 - Manual (Page 3)

SPECIFICATIONS
GENERAL
Channels : Transmit 55
Receive 55
Frequency Control
Method :
PUL synthesizer
Antenna Impedance : 50 ohms, nominal
Speaker : 2,85 Inch, 8 ohms
Microphone ; Rugged 600 ohms dynamic element with coiled cord and
plug-in connector
Channel Display : LED numerical readout
DOC Approval : Type approved under Australia Department of Communica­
tions
Frequency Stability : ±0.0005%
Operating Tempera­
ture Range : -20‘’Cto +50“C
Shock and Vibration : Meets or exceeds El A standards, RSI 52A and RS204A
Si 26 : 7-1/4''W(185m/m) x9-7/8"L{250m/m) x 2-1/4"H(58m/m)
Weight : 4.5 LBS
Controls : On-Off/Volume, squelch & dimmer controls
Selector Switches : 1W/25W power selector. Instant channel 16 and main
channel selector switches
Connectors ; Antenna, microphone, remote speaker, DC power
Frequency Range : 156 to 158 MHz transmit
156 to 163 MHz receive
Lights and
Indicators : Red/Green Transmit-Receive LED, Green 7 segment LED
Channel Readout, Low Power & Channel 16 LED
Standard Accessories: Plug-in microphone, mounting bracket and hardware, DC
power cord, mike hanger, spare fuse, owner's manual.
Supply Voltage : 13.8V DC negative ground
TRANSMITTER
Power Output ; 25 or 1 watt (switch selectable)
Power Requirement : 25 watts output: 4.5A @ 13.8V DC.
1 watt output : 1 .OA @ 13,8V DC.
Modulation : FM, ±5 kHz deviation (FCC designator 16F3)
- 2 -