Uniden PRO520E - Manual (Page 5)

TROUBLE SHOOTING
If your PRO 520e is not performing up to
your expectations, please try the following
troubleshooting steps after reading this
manual.
If you determine that service is necessary,
contact your local dealerorpack the unit in
its original carton and send it along with a
brief, concise description of the problem,
yourname, address, phonenumber, anda
copy of the original purchase receipt to the
address listed in the warranty.
TROUBLE CHECK
Unit will not turn on.
No power 1. Check power cord and all connections.
2. Check power cord fuse.
3. Check vehicle eiectrical system.
Poor reception 1. Check and adjust Squelch.
2. Check antenna system, cable, and connectors.
3. Check operation mode of the radio.
Weak transmission 1. Check antenna system, cable, and connectors.
2. Check antenna grounding.
3. Check for corrosion on connectors.
Servicing Your CB
Technical information, diagrams and charts
will be provided upon request. It is the
user's responsibility to see that this radio is
operating at all times in accordance with
the D.O.C, Citizens Radio Service regu­
lations. We highly recommend that you
consult a qualified radiotelephone tech­
nician for service and alignment of this
radio. When ordering parts, it is important
to specify the correct model number and
serial number of this radio.
Please refer to the WARNING information
on the first page of this manual.